Concrete Rebar Calculator
Lay out a #4 rebar grid for your slab: total bar footage with laps, number of 20-ft sticks, and how many chairs hold it up.
A 20 × 20 ft slab with #4 rebar at 18 inches each way needs about 601 linear feet of bar including laps, which is 31 twenty-foot sticks and about 49 chairs.
Concrete Rebar & Reinforcement Estimator
How the Grid Is Laid Out
Bars start 3 inches in from each edge (so they stay covered by concrete), then run at the chosen spacing in both directions. The total length gets 10% added for laps and offcuts; where two bars meet end to end they overlap about 40 bar diameters (20 inches for #4). Chairs hold the grid near the middle of the slab, roughly every 3 to 4 ft. This is the same grid our slab calculator draws in its blueprint.
Lighter foot-traffic slabs often use welded wire mesh instead; see the wire mesh calculator and our rebar vs. wire mesh guide.
Rebar for Common Slab Sizes
| Slab | Bar (lin ft) | 20-ft sticks | Chairs |
|---|---|---|---|
| 10 × 10 ft | 146 | 8 | 16 |
| 12 × 16 ft | 276 | 14 | 30 |
| 20 × 20 ft | 601 | 31 | 49 |
| 24 × 24 ft | 827 | 42 | 81 |
| 30 × 40 ft | 1,745 | 88 | 154 |
| 40 × 60 ft | 3,505 | 176 | 294 |
Need a Full Project Cost Estimate?
This tool works out one part of the job. Our Concrete Slab Cost Calculator prices the whole slab: concrete, gravel base, forms, vapor barrier, reinforcement, finish, labor and delivery.