Concrete Project Cost Calculator
Build a full slab budget line by line: site prep, base, forms, vapor barrier, reinforcement, concrete, finish, labor, delivery and contingency.
With the calculator's default scope (ready-mix, forms, vapor barrier, #4 rebar, broom finish and contractor labor), a 20 × 20 ft slab 4 inches thick comes to about $4,253 including 5% contingency. Switch items on or off and edit any rate below.
Concrete Slab Cost & Volume Estimator
Precision multi-layer project budgeting: Materials, Sub-Base, Reinforcement, Labor & Equipment
Picking a location sets the ready-mix, excavation and labor rates below to that area's typical level. You can still type your own local prices afterwards. Slab prices by state.
Closer spacing uses more steel and raises the rebar cost.
Not charged when bagged concrete is selected.
A scaled plan of your slab: rebar grid at the spacing you chose, support chairs about every 3 to 4 ft, and the recommended control-joint saw cuts (2.5 times the thickness in inches, in feet, capped at 15 ft). It redraws as you change the inputs.
| Scope Item / Material Description | Amount |
|---|
Enter the total your contractor quoted. We compare it with a benchmark for the same slab and scope you set in the calculator: materials at your entered prices plus labor at the regional standard rate, before any overhead or profit. Make sure the calculator scope (base, rebar, finish, pump, demolition) matches what the bid includes.
Optional: enter the bid's line items to see where the markup sits
Enter the forecast for pour day. The check follows ACI 306R (cold weather) and ACI 305R (hot weather) and estimates the surface evaporation rate that drives plastic shrinkage cracking.
Line Items in a Slab Budget
| Item | Basis (20 × 20 ft, 4 in) | Cost |
|---|---|---|
| Ready-mix concrete + delivery | 5.43 yd³ at $150/yd³ + $120 | $935 |
| Forms | 80 lin ft at $2.20 | $176 |
| Vapor barrier | 400 sq ft at $0.35 | $140 |
| #4 rebar grid | 400 sq ft at $1.25 | $500 |
| Broom finish | 400 sq ft at $0.75 | $300 |
| Labor | 400 sq ft at $5.00 | $2,000 |
| Contingency | 5% of the above | $203 |
| Total | Default calculator scope | $4,253 |
Costs a Slab Budget Often Misses
- Permits and inspections ($50–$350 for a typical residential slab).
- Old slab removal ($3–$4 per sq ft).
- Pumping if the truck cannot reach ($600–$1,200).
- Sealer, drains, sleeves for utilities and any landscaping repair after the work.
Already have a contractor's number? Put it into the concrete quote checker to see whether it is in a fair range.