Gravel Base Calculator

Crushed Gravel Volume (w/ 15% Compaction)
5.68 cubic yards
Total Mass (Tons)
7.95 tons crushed gravel

How the Base Is Calculated

Gravel to order
Area × Depth (in) ÷ 12 ÷ 27 × 1.15
Multiply yards by about 1.4 to get tons; most yards sell stone by the ton.

The base spreads the slab's load and lets water drain away from its underside. Spread it in thin layers and run a plate compactor over each one. See how much gravel you need under a slab for stone types and when a base can be thinner.

How Much Gravel Under a Concrete Slab, by Size

Slab4 in base6 in base
10 × 10 ft1.4 yd³ (2.0 tons)2.1 yd³ (3.0 tons)
12 × 16 ft2.7 yd³ (3.8 tons)4.1 yd³ (5.7 tons)
20 × 20 ft5.7 yd³ (8.0 tons)8.5 yd³ (11.9 tons)
24 × 24 ft8.2 yd³ (11.4 tons)12.3 yd³ (17.2 tons)
30 × 40 ft17.0 yd³ (23.9 tons)25.6 yd³ (35.8 tons)
40 × 60 ft34.1 yd³ (47.7 tons)51.1 yd³ (71.6 tons)
Compacted crushed stone, including 15% extra for compaction, at about 1.4 tons per yard.

Need a Full Project Cost Estimate?

This tool works out one part of the job. Our Concrete Slab Cost Calculator prices the whole slab: concrete, gravel base, forms, vapor barrier, reinforcement, finish, labor and delivery.

Open the Slab Cost Calculator →

Frequently Asked Questions

Multiply the slab area by the base depth, divide by 12 and by 27 for cubic yards, and add 15% for compaction. A 4-inch base under a 20 x 20 ft slab is about 5.68 cubic yards, or 7.95 tons of crushed stone.
4 to 6 inches of compacted crushed stone for patios, sheds, driveways and garage floors. Go thicker on soft or wet soil, and compact it in layers of no more than about 4 inches.
Crushed stone with fines (often sold as 3/4-inch minus, crusher run or road base) compacts into a firm, level layer. Clean 3/4-inch stone drains better and is used where water is a concern. Avoid round pea gravel, which rolls and does not lock together.
About 1.4 tons per cubic yard for crushed stone. Most suppliers sell by the ton, so convert your yards before you order.

Slab Estimating & Editorial Engineering Team

Construction Cost Estimators & Civil Engineering Analysts
Our team specializes in structural flatwork estimating, concrete mix designs, and civil building codes (ACI 302.1R, ASTM C94). All calculators and cost guides are rigorously validated against live contractor material price sheets, regional aggregate indexes, and real-world project bids.