Concrete Rebar & Reinforcement Estimator

Total Linear Footage (w/ 10% Splice)
601 linear ft
Total Rebar Sticks
31 bars (20ft sticks)
Support Chairs Needed
49 rebar chairs

How the Grid Is Laid Out

Bars start 3 inches in from each edge (so they stay covered by concrete), then run at the chosen spacing in both directions. The total length gets 10% added for laps and offcuts; where two bars meet end to end they overlap about 40 bar diameters (20 inches for #4). Chairs hold the grid near the middle of the slab, roughly every 3 to 4 ft. This is the same grid our slab calculator draws in its blueprint.

Lighter foot-traffic slabs often use welded wire mesh instead; see the wire mesh calculator and our rebar vs. wire mesh guide.

Rebar for Common Slab Sizes

SlabBar (lin ft)20-ft sticksChairs
10 × 10 ft146816
12 × 16 ft2761430
20 × 20 ft6013149
24 × 24 ft8274281
30 × 40 ft1,74588154
40 × 60 ft3,505176294
#4 bar at 18 in each way, 3 in edge cover, 10% added for laps.

Need a Full Project Cost Estimate?

This tool works out one part of the job. Our Concrete Slab Cost Calculator prices the whole slab: concrete, gravel base, forms, vapor barrier, reinforcement, finish, labor and delivery.

Open the Slab Cost Calculator →

Frequently Asked Questions

For a #4 grid at 18 inches each way, plan on about 1.5 linear feet of bar per square foot of slab including laps. A 20 x 20 ft slab needs about 601 ft (31 twenty-foot sticks) and 49 chairs; the table on this page lists other sizes.
#3 (3/8 in) or #4 (1/2 in) bar. #4 at 18 inches each way is the common choice for driveways and garage floors; #3 or welded wire mesh is enough for patios and walks. Keep the bar near mid-depth on chairs with at least 3 inches of cover at the edges.
18 inches each way is standard for residential slabs. Tighten to 12 inches for RV pads, heavy trucks or poor soil; light foot-traffic slabs can use 24 inches or wire mesh.
Not always. Rebar does not stop cracks; it keeps them tight so the pieces do not shift. Use it for slabs that carry vehicles, sit on clay or will hold a building. A patio or walkway is often fine with wire mesh or fiber mix and properly spaced control joints.

Slab Estimating & Editorial Engineering Team

Construction Cost Estimators & Civil Engineering Analysts
Our team specializes in structural flatwork estimating, concrete mix designs, and civil building codes (ACI 302.1R, ASTM C94). All calculators and cost guides are rigorously validated against live contractor material price sheets, regional aggregate indexes, and real-world project bids.