Concrete Mix Ratio Calculator
Mixing concrete yourself from cement, sand and stone? Get the bags of portland cement, sand, gravel and water for your slab and mix ratio.
A 10 × 10 ft slab 4 inches thick mixed at 1:2:3 (cement : sand : stone) with 10% waste takes about 10 bags of 94-lb portland cement, 0.9 tons of sand, 1.5 tons of gravel and 53 gallons of water.
Cement, Sand, Stone & Water
How the Mix Is Calculated
Dry ingredients take up more room than the concrete they make, because sand fills the gaps between stones and cement paste fills the gaps in the sand. That is why the dry volume is about 54% more than the slab volume. Water is set by a water-to-cement ratio of about 0.50 by weight: less water makes stronger concrete, so add only enough to make it workable.
Which Mix Ratio to Use
- 1:1.5:3: Rich mix for thin sections, steps and repairs
- 1:2:3: Standard mix for slabs, driveways and posts
- 1:2:4: General mix for footings and light slabs
- 1:3:6: Lean fill under slabs, not for wearing surfaces
Site-mixed concrete varies from batch to batch. For slabs that carry cars or need a set strength, ready-mix (ordered by PSI, see the ready-mix calculator) or bagged mix (see the bags calculator) is more predictable.
Need a Full Project Cost Estimate?
This tool works out one part of the job. Our Concrete Slab Cost Calculator prices the whole slab: concrete, gravel base, forms, vapor barrier, reinforcement, finish, labor and delivery.