Concrete Weight Calculator

Wet Weight (As Poured)
19,333 lbs
9.67 US tons
Cured (Dry) Weight
18,753 lbs (~cured)
Metric Equivalent
8,769 kg
8.77 metric tonnes

Based on normal-weight concrete at ~145 lb/cu ft. Cured (dry) weight is an approximation reflecting typical bleed-water loss during the 28-day cure, not a mix-specific lab figure.

How Weight Is Calculated

Slab weight
Volume (ft³) × 145 lb/ft³
Divide by 2,000 for US tons, or multiply by 0.4536 for kilograms.

Weight matters when you haul old concrete away (dumpsters and trailers have weight limits), when a slab sits on a structure or a lift, and when you move precast pieces. Lightweight concrete with special aggregate weighs noticeably less, and heavily reinforced concrete a little more. For debris from a tear-out, the removal calculator estimates both the tonnage and the cost.

Need a Full Project Cost Estimate?

This tool works out one part of the job. Our Concrete Slab Cost Calculator prices the whole slab: concrete, gravel base, forms, vapor barrier, reinforcement, finish, labor and delivery.

Open the Slab Cost Calculator →

Frequently Asked Questions

Normal-weight concrete weighs approximately 145 lbs per cubic foot (about 3,915 lbs per cubic yard). Multiply your slab's volume in cubic feet by 145 to estimate total wet weight.
Slightly — cured (dry) concrete typically weighs a few percent less than its freshly-poured "wet" weight due to bleed-water loss during the roughly 28-day cure. This is an approximation, not a precise mix-specific figure.
Weight determines what a supporting structure, trailer, or piece of equipment needs to be rated for — relevant for elevated slabs, equipment pads, or hauling away demolished concrete.

Slab Estimating & Editorial Engineering Team

Construction Cost Estimators & Civil Engineering Analysts
Our team specializes in structural flatwork estimating, concrete mix designs, and civil building codes (ACI 302.1R, ASTM C94). All calculators and cost guides are rigorously validated against live contractor material price sheets, regional aggregate indexes, and real-world project bids.