Concrete Bags Calculator

Total Bags Required
62 bags
Estimated Material Cost
$403.00

How Bag Counts Are Worked Out

Bags needed
Area (sq ft) × Thickness (in) ÷ 12 × (1 + waste %) ÷ bag yield
Bag yields: 80 lb = 0.60 ft³, 60 lb = 0.45 ft³, 50 lb = 0.375 ft³, 40 lb = 0.30 ft³. Always round up to a whole bag.

Bags make sense for small pours. Above about 1.5 cubic yards, a ready-mix truck usually costs less and saves a lot of lifting. See ready-mix vs. bagged concrete for the break-even, or how many bags of concrete do I need for a full bag-by-bag guide.

Need a Full Project Cost Estimate?

This tool works out one part of the job. Our Concrete Slab Cost Calculator prices the whole slab: concrete, gravel base, forms, vapor barrier, reinforcement, finish, labor and delivery.

Open the Slab Cost Calculator →

Frequently Asked Questions

Calculate the cubic feet of concrete needed (length × width × thickness ÷ 12), add 10% for waste, then divide by the bag's yield: 0.60 cu ft for an 80 lb bag, 0.45 for 60 lb, 0.375 for 50 lb, and 0.30 for 40 lb.
For small pours (under roughly 1 cubic yard), bagged pre-mixed concrete is usually more cost-effective once you factor in ready-mix minimum-load and short-load delivery fees. Above about 1.5 cubic yards, ready-mix is typically cheaper even with the fee.
Yes. The published yield (e.g., 0.60 cu ft for an 80 lb bag) is the finished, mixed volume after water is added — you don't need to apply any additional dry-to-wet conversion on top of it.

Slab Estimating & Editorial Engineering Team

Construction Cost Estimators & Civil Engineering Analysts
Our team specializes in structural flatwork estimating, concrete mix designs, and civil building codes (ACI 302.1R, ASTM C94). All calculators and cost guides are rigorously validated against live contractor material price sheets, regional aggregate indexes, and real-world project bids.