Concrete Waste Factor Calculator
Pick the waste allowance that fits your site, and see how much extra concrete it adds and what that costs compared with running short.
For a 20 × 20 ft slab 4 inches thick, a 10% waste allowance adds 0.49 yd³ (about $74 of ready-mix at $150 per yard). Running short instead can cost a second delivery fee of $120 plus a short-load fee of $80 to $200.
Waste Allowance & Its Cost
Where the Extra Concrete Goes
Ground is never perfectly flat: a base that dips a quarter inch over a large slab can swallow a surprising amount of concrete. Forms bow a little under the weight of wet concrete, some spills from the chute or wheelbarrow, and some stays in the pump or mixer. The allowance below covers those losses so you finish the pour in one go.
- 5%: Rigid forms on a flat, well-compacted base
- 10%: Typical formed slab (recommended)
- 15%: Uneven or soft subgrade, curves, many edges
- 20%: Dug trenches, footings, rough ground
More detail in our guide to the concrete waste factor.
Need a Full Project Cost Estimate?
This tool works out one part of the job. Our Concrete Slab Cost Calculator prices the whole slab: concrete, gravel base, forms, vapor barrier, reinforcement, finish, labor and delivery.